Plus Two Physics · Ray Optics · 3D

Concave lens: focal length using a convex lens in contact

A concave lens alone gives no real image on a screen. Put it in contact with a stronger convex lens and the pair does. Measure the convex lens alone (f₁) and the combination (F) by the u–v method. Then 1/F = 1/f₁ + 1/f₂, so f₂ = f₁F / (f₁ − F).

u = 25.0 cm
v = 40.0 cm

Drag the object or the screen along the bench · drag the background to rotate · scroll or pinch to zoom

Tap “Full screen” and turn your phone sideways for a bigger view

3D view is not available on this device, but you can still do the whole experiment with the controls below.
—
25.0 cm
40.0 cm
Image on the screen
Sharpness 0 % ·
Image size: —

The idea

A concave lens always forms a virtual image, so its focal length cannot be found directly with a screen. Placed in contact with a convex lens of shorter focal length, the combination is converging and forms real images. The powers of thin lenses in contact add.

  • u–v method for each setting: f = uv/(u + v)
  • Lenses in contact: 1/F = 1/f₁ + 1/f₂, or P = P₁ + P₂
  • So f₂ = f₁F/(f₁ − F), which comes out negative (a diverging lens)
  • The combination is weaker than the convex lens alone, so F > f₁

Observations

The table shows the readings for the setting selected above.

u (cm)v (cm)f = uv/(u+v) (cm)1/u (cm⁻¹)1/v (cm⁻¹)
Mean f—

    Graphs

    v against u

    1/v against 1/u

    Record at least 2 readings to see the best-fit line.

    Precautions

    • The lens, the object and the screen must be at the same height, with their centres on one straight line (the optical axis).
    • The tip of the object needle or arrow must lie on the axis of the lens, and the lens must be placed upright, perpendicular to the bench.
    • Keep u greater than f. If the object is inside the focal length no real image forms on the screen.
    • Find the position of best focus by moving the screen a little each side of the sharpest image and taking the middle.
    • Avoid values of u very close to f, where v becomes very large, and values near 2f where small errors matter more. Take readings between 1.5 f and 3 f.
    • Perform the experiment in a darkened room, with the object brightly lit, so that the image is easy to see.