Drag the orange bridge B₂ along the wire · drag the background to rotate · scroll or pinch to zoom
Tap “Full screen” and turn your phone sideways for a bigger view
The idea
A wire of linear density μ under tension T carries waves at speed v = √(T/μ). Between two bridges it vibrates in its fundamental mode, so the length is half a wavelength. When the wire's natural frequency equals the fork's, the wire resonates and the paper rider is thrown off.
- Fundamental: f = (1 / 2L) √(T/μ)
- Fixed f: L ∝ √T, so T / L² = constant = 4f²μ
- Linear density: μ = T / (4 f² L²) (L in metres)
Wire: steel, diameter 0.25 mm, μ = 3.8 × 10⁻⁴ kg/m. Hanger mass 0.5 kg, each slotted weight 0.5 kg, g = 9.8 m/s².
Observations
Frequency is fixed for the whole set. Changing the fork clears the readings.
| Mass M (kg) | T = Mg (N) | L (cm) | √T / L (N½/m) | T / L² (N/m²) | μ (×10⁻⁴ kg/m) |
|---|
Check your readings
Graph
Plot L² against T. It is a straight line through the origin: L² ∝ T. Its slope is 1/(4f²μ).
Record at least 2 tensions to see the best-fit line.
Precautions
- The wire must be uniform, free from kinks, and stretched taut by the weights.
- The pulley must turn freely so that the hanging weight really sets the tension.
- Press the stem of the fork firmly on the box, close to the wire, so the vibration passes into the wire.
- Move the bridge slowly near resonance: the rider jumps off over a range of only a few millimetres.
- Read the length from the same edge of the bridge every time, with your eye directly above the scale.
- Use the same tuning fork for the whole set of readings.